60th day at SSMC.
Today, my supervisor had reviewed with me regarding the poster that I have done as school assignment and improvements have been made to it.
After which, my department head had reviewed my school report and similarly, changes were done. If everything goes well, I may be able to finish my school assignments beforehand. (^^)
After lunch, I had helped my supervisor to update an analysis PowerPoint. I had updated the charts in the PowerPoint to 2012 data.
After finishing the task, I continued to do my school report and got it ready to be shown to my department head for the last round. And if it's okay, my supervisor will send it out for me. Yeah! Hope it's okay. (^^)
The rest of my free time was spent on improving my poster but i am still not confident with it. Hope I can do a good poster.
That's all for today. Byebye.
Thursday, 10 January 2013
Wednesday, 9 January 2013
Week 13 - 09 Jan 2013 - Wed
59th day at SSMC.
This morning I had helped my supervisor to update an Excel file by inserting the raw data into a table which will be analysed by the pivot table and the analysed results will be displayed in another table.
For this task, there were some inconsistency in the raw data, most probably were due to human errors during data entry. Thus, I had double checked the unusual raw data with the individual report on the lot ID and then correct the raw data in the Excel file before I insert the raw data into the table.
After finishing this task, I carried on to create a document on the list of chart IDs that we have as it is required by the IT personnel to link the triggering system to the charts that we have. (^^)
After lunch, I had followed my supervisor into the fab again to teach the MAs on the steps for data entry into the database, with the help of my training guides. I had included screen shots of the steps to allow clearer understanding of the MAs.
After showing the MA the steps, she gave us her feedback on the new procedures and during the discussion, problems arises.
After which, I had went back to the office to do a PowerPoint on the tasks that I had completed and the problems that we met. My supervisor will be using this PowerPoint to discuss with the IT personnel on the solution to all the problems we faced.
That's all for today.
This morning I had helped my supervisor to update an Excel file by inserting the raw data into a table which will be analysed by the pivot table and the analysed results will be displayed in another table.
For this task, there were some inconsistency in the raw data, most probably were due to human errors during data entry. Thus, I had double checked the unusual raw data with the individual report on the lot ID and then correct the raw data in the Excel file before I insert the raw data into the table.
After finishing this task, I carried on to create a document on the list of chart IDs that we have as it is required by the IT personnel to link the triggering system to the charts that we have. (^^)
After lunch, I had followed my supervisor into the fab again to teach the MAs on the steps for data entry into the database, with the help of my training guides. I had included screen shots of the steps to allow clearer understanding of the MAs.
After showing the MA the steps, she gave us her feedback on the new procedures and during the discussion, problems arises.
After which, I had went back to the office to do a PowerPoint on the tasks that I had completed and the problems that we met. My supervisor will be using this PowerPoint to discuss with the IT personnel on the solution to all the problems we faced.
That's all for today.
Tuesday, 8 January 2013
Week 13 - 08 Jan 2013 - Tue
58th day at SSMC.
Today, supervisor had asked me to create a reference for the DCOPs for the MAs in the fab. As there is just too much for them to remember and it will be time consuming for their to search for the required DCOP. Thus, I was supposed to create one that will be easier for them to look for the required DCOP. And supervisor had said that when we do things, we must make sure it is easy and straight forward when executing. Hence, the DCOP that I had done must be able to allow the MAs to get their work done quickly.
The DCOPs arrangement in the DCOP reference that I've done was same as how the points, in the form that the MAs had been using all these years' are arranged in. Thus, they should be able to get used to it soon. And it had been approved by my supervisor. (^^)
The next task I had was to edit the SOP report on this project. My supervisor had checked through and told me what other information that has to be added in. Screen shots of the procedures can also be added in to make the report easier for understanding. This is somewhat similar to the training guides that I've done in the earlier days of this attachment.
After which, I had edited some miscellaneous things and that's about it for today. See you. (^^)
Today, supervisor had asked me to create a reference for the DCOPs for the MAs in the fab. As there is just too much for them to remember and it will be time consuming for their to search for the required DCOP. Thus, I was supposed to create one that will be easier for them to look for the required DCOP. And supervisor had said that when we do things, we must make sure it is easy and straight forward when executing. Hence, the DCOP that I had done must be able to allow the MAs to get their work done quickly.
The DCOPs arrangement in the DCOP reference that I've done was same as how the points, in the form that the MAs had been using all these years' are arranged in. Thus, they should be able to get used to it soon. And it had been approved by my supervisor. (^^)
The next task I had was to edit the SOP report on this project. My supervisor had checked through and told me what other information that has to be added in. Screen shots of the procedures can also be added in to make the report easier for understanding. This is somewhat similar to the training guides that I've done in the earlier days of this attachment.
After which, I had edited some miscellaneous things and that's about it for today. See you. (^^)
Monday, 7 January 2013
Week 13 - 07 Jan 2013 - Mon
57th day at SSMC.
Today started my day in SSMC by helping my supervisor to update the charts and tables in an analysis PowerPoint. As the charts and tables are pasted into the PowerPoint as links, thus when you double clicked on them, you will be brought to the respective Excel files.
After I was linked to the Excel files, I had updated the charts and tables into the 2013 version. And after doing so, when I 'update link' in the charts and tables in the PowerPoint, they will display the 2013 version.
After which, my following task was to insert the information given by my supervisor into the Excel file and using all the information inserted, I did a calculation summary out of it. Though my description in here sounds short and simple, the second task took me quite some time.
After lunch, I was free to do my school report. As I had only 4 weeks left to the end of thus attachment, thus, I have to speed up a little. (^^)
That's all for today. Byebye.
Today started my day in SSMC by helping my supervisor to update the charts and tables in an analysis PowerPoint. As the charts and tables are pasted into the PowerPoint as links, thus when you double clicked on them, you will be brought to the respective Excel files.
After I was linked to the Excel files, I had updated the charts and tables into the 2013 version. And after doing so, when I 'update link' in the charts and tables in the PowerPoint, they will display the 2013 version.
After which, my following task was to insert the information given by my supervisor into the Excel file and using all the information inserted, I did a calculation summary out of it. Though my description in here sounds short and simple, the second task took me quite some time.
After lunch, I was free to do my school report. As I had only 4 weeks left to the end of thus attachment, thus, I have to speed up a little. (^^)
That's all for today. Byebye.
Friday, 4 January 2013
Week 12 - 04 Jan 2013 - Fri
56th day at SSMC.
Today, I had started off with the updating of the daily defect task. During which, one of the lot was sent out and in normal cases, this will be considered as a defect count. However, my supervisor had asked me to pull out the individual report of that lot and after checking its report, that lot was actually not a defect count. Thus, there was no defect count for today. And when there is no defect count, the daily defect task will be much simpler to update.
After which, my supervisor had told me to follow her into the fab later in the afternoon to review the SPC charts that I've done. This was done during her free time while waiting for the equipment to finish running.
However, the main purpose of me going into the fab cleanroom was actually to teach the MAs the new procedures of using the SPC charts. As they have to familiarise with the new procedures so that they can adapt more quickly when they switch to using the new procedures.
After lunch, I had helped my supervisor to create an acknowledgement form which wad checked by my supervisor when we had gone into the fab.
While we were in the fab, the training guide that I had done earlier was still not able to be put into use. I had showed my supervisor on the steps to enter the measured values; however, we had discovered a loophole. Thus, Miss Pascale asked me to return to the office and consult an IT engineer for the solution to the loophole we found.
After consulting the IT engineer, I reported to Miss Pascale that the IT emgineer mentioned that there is no way out for the loophole. Thus, we can only result to the last solution which I think I am not supposed to share it so openly. Haha.
After which, I had went back to the office to do some follow ups of my report and task description for the week.
That's all for today and finally weekends are here! Time to have a good rest
Today, I had started off with the updating of the daily defect task. During which, one of the lot was sent out and in normal cases, this will be considered as a defect count. However, my supervisor had asked me to pull out the individual report of that lot and after checking its report, that lot was actually not a defect count. Thus, there was no defect count for today. And when there is no defect count, the daily defect task will be much simpler to update.
After which, my supervisor had told me to follow her into the fab later in the afternoon to review the SPC charts that I've done. This was done during her free time while waiting for the equipment to finish running.
However, the main purpose of me going into the fab cleanroom was actually to teach the MAs the new procedures of using the SPC charts. As they have to familiarise with the new procedures so that they can adapt more quickly when they switch to using the new procedures.
After lunch, I had helped my supervisor to create an acknowledgement form which wad checked by my supervisor when we had gone into the fab.
While we were in the fab, the training guide that I had done earlier was still not able to be put into use. I had showed my supervisor on the steps to enter the measured values; however, we had discovered a loophole. Thus, Miss Pascale asked me to return to the office and consult an IT engineer for the solution to the loophole we found.
After consulting the IT engineer, I reported to Miss Pascale that the IT emgineer mentioned that there is no way out for the loophole. Thus, we can only result to the last solution which I think I am not supposed to share it so openly. Haha.
After which, I had went back to the office to do some follow ups of my report and task description for the week.
That's all for today and finally weekends are here! Time to have a good rest
Thursday, 3 January 2013
Week 12 - 03 Jan 2013 - Thu
55th day at SSMC.
Today, I had updated the daily defect task and also had amended yesterday's PowerPoint slides as I had accidentally pasted the information from the 2012 Excel file. After I had checked through and changed the information to the one copied from the 2013 file, I sent the file link to my supervisor for checking.
After which, supervisor was too busy to assign me other task, so I had continued to do my school report.
After lunch, I had helped supervisor to do some miscellaneous tasks here and there. But most of my free time was spent on doing my school report. (^^)
That's about it for today.
Today, I had updated the daily defect task and also had amended yesterday's PowerPoint slides as I had accidentally pasted the information from the 2012 Excel file. After I had checked through and changed the information to the one copied from the 2013 file, I sent the file link to my supervisor for checking.
After which, supervisor was too busy to assign me other task, so I had continued to do my school report.
After lunch, I had helped supervisor to do some miscellaneous tasks here and there. But most of my free time was spent on doing my school report. (^^)
That's about it for today.
Wednesday, 2 January 2013
Week 12 - 31 Dec 2012 & 02 Jan 2013 - Mon & Wed
53rd & 54th day at SSMC.
Today is 02 Jan 2013 but I will also be sharing Monday's events. ;)
For 31 Dec 2012, it was an early release where we ended at 3pm. What's better was we had team building activities that day. We had played games from 10am to 12noon. Besides, the prizes for playing the games, we also had lucky draws too.
After which, we went to The Square@Furama to have our buffet lunch!!! How cool was that! I was so lucky to be involved. I had fun that day being one of the game organisers, watching the participants played the games. One of the teams had even danced Gangnam style for additional points (^^). I had enjoyed myself that day.
For today, I had updated the daily defect task for today and yesterday. As today is the 2nd Jan 2013, we have changed to use the new 2013 version thus I took a little longer time then usual.
After which, I had updated an Excel file by inserting the information given by supervisor.
And finally, I had created a PowerPoint using the information given by supervisor.
The rest of my free time today, supervisor had allowed me to do my school report. (^^)
That's all for today and Monday. From now on, for those who are still writing date like me, please remember it's 2013 and not 2012 anymore. (^^)
Today is 02 Jan 2013 but I will also be sharing Monday's events. ;)
For 31 Dec 2012, it was an early release where we ended at 3pm. What's better was we had team building activities that day. We had played games from 10am to 12noon. Besides, the prizes for playing the games, we also had lucky draws too.
After which, we went to The Square@Furama to have our buffet lunch!!! How cool was that! I was so lucky to be involved. I had fun that day being one of the game organisers, watching the participants played the games. One of the teams had even danced Gangnam style for additional points (^^). I had enjoyed myself that day.
For today, I had updated the daily defect task for today and yesterday. As today is the 2nd Jan 2013, we have changed to use the new 2013 version thus I took a little longer time then usual.
After which, I had updated an Excel file by inserting the information given by supervisor.
And finally, I had created a PowerPoint using the information given by supervisor.
The rest of my free time today, supervisor had allowed me to do my school report. (^^)
That's all for today and Monday. From now on, for those who are still writing date like me, please remember it's 2013 and not 2012 anymore. (^^)
Subscribe to:
Posts (Atom)